-40%
2.5
2.5
2.5
2.5
2.5
2.5
2.5

2.5" SSD SATA to 3.5" SAS Hard Disk Drive HDD Adapter CADDY TRAY Hot Swap Plug

$ 4.18

Availability: 373 in stock
  • Interface: SAS
  • Condition: New
  • Compatible Drive Size: 2.5 in Drive
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Brand: Unbranded
  • Country/Region of Manufacture: United States
  • Restocking Fee: No
  • Type: Caddy
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    2.5" SSD SAS to 3.5" SATA Hard Disk Drive HDD Adapter CADDY TRAY Hot Swap Plug
    Product Description
    Features:
    This adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, without cables or hassles.
    Standard position mounting holes on Adapter's bottom and sides, equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used.
    Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, and the outside connector is positioned to plug into a backplane as the tray is inserted.
    Compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives.
    No loss in data transfer speeds--no bridge chip used
    Structure -- SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
    Specifications:
    This adapter is compatible with all the 3.5" SAS / SATA drive caddie trays from HP, Dell, IBM, or other manufacturers, such as HP 651314-001, IBM 69Y5284, or Dell F238F.
    External Interface: SATA(Max. SATA3.0 6Gbps/Sec)
    Compatible Drive Type:2.5" SATA or SAS HDD SSD
    Device fit: 3.5" SATA hard hot-swappable drive bay
    Structure: SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
    Note:
    This adapter can convert any 2.5" SAS/SATA/SSD drive to 3.5" form factor. However, for 2.5" SAS drives, this adapter will change dual port to single port. This is fine for most applications. But if your application requires dual port, this adapter will not work for you. And, as always, a SAS controller is required in order to support SAS drives. A 2.5" SAS drives with this adapter installed will not work on a SATA controller although its connector looks exactly the same as a normal SATA connector.
    Package content
    1*Converter
    8*Screwer