-40%

2.5" SSD to 3.5" SATA Hard Disk Drive SAS HDD Adapter CADDY TRAY Hot Swap Plug

$ 4.64

Availability: 523 in stock
  • MPN: 654540-001
  • Item must be returned within: 30 Days
  • Brand: Unbranded
  • Interface: SAS
  • All returns accepted: Returns Accepted
  • Type: Tray Sled/Caddy
  • Condition: New
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Return shipping will be paid by: Seller
  • UPC: Does not apply
  • Compatible Drive Size: 2.5 in Drive

    Description

    2.5" SSD SAS to 3.5" SATA Hard Disk Drive HDD Adapter CADDY TRAY Hot Swap Plug
    US-Seller
    Brand New with 4 x 2.5" + 4 x 3.5" Drive Screws
    This adapter can convert any 2.5" SAS/SATA/SSD drive to 3.5" form factor. However, for 2.5" SAS drives, this adapter will change dual port to single port. This is fine for most applications. But if you
    r application requires dual port, this adapter will not work for you. And, as always, a SAS controller is required in order to support SAS drives. A 2.5" SAS drives with this adapter installed will not work on a SATA controller although its connector looks exactly the same as a normal SATA connector
    This adapter is compatible with all the 3.5" SAS/SATA drive caddie trays from HP, Dell, IBM, or other manufacturers, such as HP 651314-001, IBM 69Y5284, or Dell F238F.dell KG1CH
    Description:
    This adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, without cables or hassles.
    Standard position mounting holes on Adapter's bottom and sides, equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used.
    Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, and the outside connector is positioned to plug into a backplane as the tray is inserted.
    Compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives.
    No loss in data transfer speeds—no bridge chip used
    Structure -- SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
    Package Contents:
    1 x 2.5" to 3.5" SATA SSD HDD Adapter (654540-001)
    4 x 2.5" Drive Screws + 4 x 3.5
    " Drive Screws
    Payment:
    Paypal
    Preferred.
    If could not use Paypal, contact me for more instructions.
    Local pickup NOT available at this time.
    Shipping:
    We process your order within
    1
    business day
    upon payment
    (note: NOT counting
    holidays
    or
    weekends
    ).
    Import duties, taxes and charges are not included on the item price or shipping charges. These charges are buyer's responsibility.
    Package transit time: please expect 3-5 business days within US, 5-10 business days to Canada,Mexico, up to 20 business days all around the world.
    Return & Refund:
    Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or there's error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any.
    Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost.
    About Us:
    Proud to be top rated US seller, serving ebay community for over 6 years. If you're looking to buy in bulk or looking for a long term part supplier, please contact me directly
    .