NEW Kasco 3/4hp Water Circulator De-Icer Agitator 120 Volt w/ 50' Cord + Float

Description

Kasco 3/4HP Circulator / de-icer / agitator OPERATION  ***NOTE Kasco has lead times of 2-3 weeks as of 7-20-2021
Submersed motor in a horizontal position pushes the water to create directional flow using an open propeller design
Moving water mixes and agitates the water, spreading oxygenated water throughout the body of water, elimination stagnant areas, and mixing thermally and chemically stratified water
Single open propeller design allows for greater water flow with a lower likelihood of clogging
Coated stainless steel cage/propeller guard shall catch large debris and assist in reducing the likelihood of clogging while allowing for maximum water flow into the unit.
Prevent costly ice damage! Kasco de-icers, circulators, and agitators are designed to prevent the formation of damaging ice around docks and boats. Thousands of these units are being used in marinas, harbors, waterfront developments and recreational ponds to prevent costly ice damage. De-icers come complete with power cord and two 20' suspension ropes. Time and temperature control – save money in reduced electrical usage! The controller (C20), designed exclusively for Kasco, will only operate when both the timer and thermostat are activated, unlike regular timers which run the motor every day at a set time. This controller will only operate when the temperature requires it. A temperature only controller (C10) is available that operates motor whenever freezing conditions exist. . These circulators are excellent for de-icing applications but also have proven very effective for summer time use in preventing stagnant water. Used in marinas, bays or lake coves, irregular shaped ponds and other similar applications; these circulators are a cost effective way to improve water quality.
A 1/2 hp circulator can effectively circulate water in a one acre pond twelve feet deep. Circulators are an ideal choice for shallow bodies of water where diffused air systems do not work.
The 3400 Circulator/Mixer is the mid-size workhorse of the Kasco range ideal for a wide variety of applications. This unit can operate in depths as shallow as 30 in. yet can be effective in creating water movements as deep as 18 ft. A single 3400CF 3/4HP unit was able to create effective water movement in a canal 1,000 ft. long by 10 ft. wide and 4 ft. deep.
The 3400 is available in 120V (60Hz), 240V (60Hz) or 220V (50Hz) configurations.
The 120V and 240V 60 Hz units come with a horizontal float and mooring lines (CF models) ; The 220V 50Hz models come with float and mooring lines, the universal dock mount is available as a separate option.
Common Solutions
Remove unwanted floating debris
Potentially control mosquitoes
Reduce odors by continuously moving water
Break up thermal stratification
Mix chemicals in tanks and other industrial settings
Prevent fish ills and ice damage to docks and piers
QUICK FACTS
creates 34 lbs. of thrust
Available in 120V single phase power
Complete package includes assembled motor unit, UV resistant high density thermoplastic horizontal float, two 50' braided nylon mooring lines, and SJTOW rated 3 wire power cable
Operates in 4' depth
Total component listed by ETL to meet UL and CSA standards for safety in water
Sacrificial zinc anode installed for corosion protection and use in salt water applications
Series 300 austenitic stainless steel construction of exposed metal; salt water compatible
2 year warranty
UPS shippable
Power cable potted quick dosconnect on 12 guage cord options with stainless steel strain relief
Industrial strength design
Optional 120V power control panel with 24 hour mechanical timer and class A human rated 15 Amp GFI
Can be used in summer and winter applications
MOTOR UNIT
3/4 HP, 120V, single phase
1750 RPM motor
Oil cooled, continuous duty rated
Two long life bearings
Thermal overload protection
Fully unitized heavy duty carbon ceramic mechanical seal
Series 300 austenitic stainless housing with engineering grade thermoplastic top
Protective coated series 300 Austenitic stainless steel cage/prop guard with 18 vertical bars and 1.5" spacing
UV resistant 2 blade engineered thermoplastic propeller
POWER CABLE
SJTOW UL, CSA and NEC approved underwater rated cable
3 wire
Available in 50', 100', 150', 200', 250', 300', and 400' options (cord gauges of depend on length)
Potted quick disconnect and stainless steel strain relief standard on 12 gauge cords
6' flex sleeve protection